TMPW 50-124

AC/DC Power Supply TMPW 50 Series, 50 Watt • Compact PCB power module in 2.92" x 1.85" package • • Wide input voltage range 90-305 VAC • • I/O-Isolation 4’000 VAC • No load input power 95%, 250 periods, perf. criteria B 100%, 0.5 periods, perf. criteria A 100%, 1 period, perf. criteria A 100%, 250 periods, perf. criteria B EN 61000-4-11 30%, 25 periods, perf. criteria A 60%, 10 periods, perf. criteria A >95%, 0.5 periods, perf. criteria A >95%, 250 periods, perf. criteria B 100%, 0.5 periods, perf. criteria A 100%, 1 period, perf. criteria A 100%, 250 periods, perf. criteria B General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Storage Temperature - High Temperature - Low Input Voltage Cooling System Altitude During Operation Switching Frequency Insulation System Working Voltage (rated) Isolation Test Voltage Leakage Current Reliability Washing Process Environment - Input to Output, 60 s - Touch Current - Calculated MTBF - Vibration - Mechanical Shock Housing Material 95% max. (non condensing) –40°C to +70°C –40°C to +85°C (Max. operating temperature must be derated by 3.5°C / 1'000 m above 2'000 m) 2.5 %/K above 50°C 2 %/V below 100 VAC See application note: www.tracopower.com/overview/tmpw50 Natural convection (20 LFM) 5'000 m max. (acc. IEC 62368-1) 2'000 m max. (acc. IEC 60335-1) 55 - 90 kHz (PWM, PFM) Reinforced Insulation 342 VAC 4'000 VAC 250 µA max. 300'000 h (MIL-HDBK-217F, ground benign) Not allowed IEC 60068-2-6 2 g, 3 axis, 60 min, 10-500 Hz, 10 min/cycle IEC 60068-2-27 Plastic resin (UL 94 V-0 rated) All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com October 24, 2023 Page 3 / 4 TMPW 50 Series, 50 Watt Potting Material Silicone (UL 94 V-0 rated) (Hermetical sealed structure, dust-proof only non water-proof) Brass Tin (120 µm min.), matte Plastic Case PCB Mount THD (Through-Hole Device) Lead-Free Wave Soldering 270°C / 3 s max. 158 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 0613a8c0-7125-41c2-b2cf-38c78474b2d6 Pin Material Pin Surface Plating Housing Type Mounting Type Connection Type Soldering Profile Weight Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tmpw50 Outline Dimensions 74.2 Pinout (0.17) 4.20 (2.92) 62.0 23.1 8.0 (2.44) (0.91) (0.31) Ø1.0 (Ø0.04) 11.5 (0.45) (0.44) 4 11.3 Bottom View (0.90) 1 (0.95) 24.2 (0.79) (1.85) 22.8 47.0 20.0 2 Pin Function 1 AC IN (N) 2 AC IN (L) 3 –Vout 4 +Vout 3 6.1 (0.24) Dimensions in mm (inch) Tolerances: x.x ±0.5 (±0.02) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. October 24, 2023 Page 4 / 4